Dollhouse Mode is a way to interact with a scaled, tabletop version of your model.
Going to Dollhouse Mode
There are two ways to go to Dollhouse Mode.
This first way is the "Go To Dollhouse" shortcut button underneath your menu.
Click it and you will instantly be teleported to Dollhouse Mode.
Another option is to teleport straight up:
Push the purple joystick on your right-hand controller forward until you see a teleporter.
Point the teleporter straight up toward the ceiling until the dotted line turns bright blue.
Release the joystick to teleport to the Dollhouse.
Teleporting Back
To return to your model, simply point at any area in the model until you see a blue indicator. Then, press the trigger to teleport to that spot.
Using the Section Plane
By default, a section plane will be turned on in Dollhouse Mode to make it easier to look into the model.
To move the section plane up and down:
Move your controller over the section plane handlebar.
Hold down the green grip button on the side of your controller to grab it.
Move your hand up or down to move the section.
You can toggle the section plane on or off by pressing the "Section Top" button near the table's edge.
Moving and Scaling the Model
You can move the dollhouse model by holding down of the green grip buttons on either of your controllers and moving your hand.
To scale the model, hold down the green buttons on both the left and right-hand controllers, and bring your hands together.
Currently, the maximum scale in Resolve is 1:20 scale (3/4″=1′-0″).